Replacement Parts - Cooper Crouse-Hinds VDAS Serie Información De Instalación Y Mantenimiento

MAINTENANCE
1. Perform visual, electrical and mechanical inspections on a regular
basis. The environment and frequency of use should determine this.
However it is recommended that checks be made at least once a
year. We recommend an Electrical Preventive Maintenance Program
as described in the National Fire Protection Association Bulletin
NFPA 70B: Recommended Practice for Electrical Equipment
Maintenance (www.nfpa.org)
2. The globe should be cleaned periodically to ensure continued lighting
performance. To clean, wipe the globe with a clean, damp, soft
cloth. If this is not sufficient, use a mild soap or a liquid cleaner such
as Collinite NCF or Duco #7. Do not use an abrasive, strong
alkaline, or acid cleaner. Damage may result.
3. Visually check for undue heating evidenced by discoloration of wires
or other components, damaged parts, or leakage evidenced by water
or corrosion in the interior. Replace all worn, damaged or
malfunctioning components and clean gasket seals before putting the
luminaire back into service.
4. Electrically check to make sure that all connections are clean and
tight.
5. Mechanically check that all parts are properly assembled.
6. To ensure correct usage and proper selection of replacement parts,
the nameplate on the luminaire must remain clean and legible.
All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable. The accuracy
or completeness thereof are not guaranteed. In accordance with Cooper Crouse-Hinds "Terms and Conditions of Sale", and since conditions of use are
outside our control, the purchaser should determine the suitability of the product for his intended use and assumes all risk and liability whatsoever in
connection therewith.

REPLACEMENT PARTS

VDAS series strobe light luminaires are designed to provide years of
reliable performance. However, should the need for replacement parts
arise, they are available through your authorized Cooper Crouse-Hinds
distributor. Assistance may also be obtained through your local Cooper
Crouse-Hinds representative or the Cooper Crouse-Hinds Sales/Service
Department, P.O. Box 4999, Syracuse, New York 13221, Phone 315-477-
5531.
Use only replacement parts for the voltage specified on the luminaire
nameplate.
Description
Electronic Strobe Subassembly
(includes flash tube)
Replacement Flash Tube
Flash Tube Globe Assembly
Cooper Industries Inc.
Crouse-Hinds Division
PO Box 4999, Syracuse, New York, 13221 • USA
Copyright© 2003, Cooper Industries, Inc.
120 VAC
240 VAC
12 VDC
24 VDC
Clear
Red
Green
Amber
Blue
Catalog Number
CHTFI-120H
CHTFI-240H
CHTFI-012
CHTFI-024
RSTC
VDAG/C
VDAG/R
VDAG/G
VDAG/A
VDAG/B
IF 1354
Revision 1
Revised 04/03
Supercedes 10/96