Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
•
Perform visual, electrical, and mechanical inspections on a regular
basis. The environment and frequency of use should determine
this. However, it is recommended that checks be made at least
once a year. We recommend an Electrical Preventive Maintenance
Program as described in the National Fire Protection Association
Bulletin NFPA No. 70B: Recommended Practice For Electrical
Equipment Maintenance (www.nfpa.org).
•
The globe (and reflector when used) should be cleaned periodically
to insure continued lighting performance. To clean, wipe the
reflector, then the globe with a clean damp cloth. If this is not
sufficient, use a mild soap or a liquid cleaner such as Collinite NCF
or Duco #7. Do not use an abrasive, strong alkaline, or acid
cleaner. Damage may result.
•
Visually check for undue heating evidenced by discoloration of
wires or other components, damaged parts, or leakage evidenced
by water or corrosion in the interior. Replace all worn, damaged, or
malfunctioning components and clean gasket seals before putting
the luminaire back into service.
•
Electrically check to make sure that all connections are clean and
tight.
•
Mechanically check that all parts are properly assembled.
IF 1452 • 06/03
REPLACEMENT PARTS
Cooper Crouse-Hinds EVI Series Incandescent Luminaires are designed
to provide years of reliable lighting performance. However, should the
need for replacement parts arise, they are available through your
authorized Cooper Crouse-Hinds distributor. Assistance may also be
obtained through your local Cooper Crouse-Hinds representative or the
Cooper Crouse-Hinds Sales Service Department, P.O. Box 4999,
Syracuse, New York 13221, Phone 315/477-7000.
Copyright © 2003, Cooper Industries, Inc.
Page 3
Publicidad
Tabla de contenido
