Hanging The Fan; Blade Installation - Beacon Lighting Lucci air SX-50-L-WH-01 Manual Del Usuario

Mariner Fan Installation Instructions
Pass the power supply wires and ground wire (C) from the ceiling outlet box (B) through the center of the
ceiling mounting bracket (D). Install the ceiling mounting bracket (D) on the outlet box (B) with the mounting
screws (F) provided with the outlet box and washers (E) provided with fan. Fig. 6
Fig. 6
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned on
the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. Fig.7
BLADE ATTACHMENT
Align the 3 holes on the blade with the 3 mounting holes on the rotating member of fan motor assembly
1.
and using the 3 blade screws to secure the blade to the fan motor assembly.
Ensure all screws are tightened evenly to reduce the chance of warping or unbalancing. Take care not
to over tighten the screws, as this can damage the blades.
2. Once completed, repeat the process on the remaining blades
5 | P a g e

HANGING THE FAN

BLADE INSTALLATION

Fig. 7
Fig. 8
SX-50-L-***-01