Hanging The Fan - Beacon Lighting MEGARA Manual De Instrucciones De Instalación

Bayside Megara Fan Installation Instructions
•
The ceiling fan must be installed in a location so that the blades are a minimum 300mm spacing from
the tip of the blade to the nearest objects or walls.
•
Install the mounting bracket to the ceiling joist or structure that is capable of carrying a load of at least
30kg, with the two long screws provided. Ensure at least 30mm of the screw is threaded into the
support. (Fig. 2)
NOTE: The bracket screws provided are for use with wooden structures only. For structures
other than wood, the appropriate screw type MUST be used. Ensure the screws used are
suitable for the mounting surface and the surrounding environment.
ANGLED CEILING INSTALLATION
This fan hanging system supports a maximum
18 degree angled ceiling installation.
Lift the fan assembly onto the mounting bracket. Ensure the key slot (A) of the hanger ball is positioned
on the key pin (B) of the mounting bracket (C) to prevent the fan from rotating when in operation. (Fig.4)
INSTALLING THE MOUNTING BRACKET
(Fig. 3)
Fig. 3

HANGING THE FAN

Fig. 4
Fig. 2