Publicidad
Idiomas disponibles
Idiomas disponibles
English
Application
Colour CCD video camera external
mounting with automatic day/night
switchover (True Day/Night) and inte-
grated infrared lighting. Horizontal
pick-up angle: ca. 45,6°–4,0°
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
• Please read through this product
information carefully before commis-
sioning the camera.
• Never operate the camera outside
the specified limiting temperature,
humidity or voltage values.
• When laying the connecting cable,
ensure that it is not subject to load,
kinked or damaged in any way.
The following installation situations
must be avoided without fail:
• Direct ajour light
• Direct sunlight
• Extremely bright picture back-
ground
• Highly reflective walls on the
opposite side of the door station
• Lamps or direct light sources
Scope of supply
• CE 950-...
• "Easy bracket" fixture
• 4 cross-head screws 5 x 30
• 4 wall plugs D = 6
• 4 Allen screws M4 x 14
• Allen key size 3
• Video SUB-OUT cable
• This product information
8
1 Product details
a Fixing screws for the sun guard
b Sun guard
c Infra-red lighting
d Lens attachment
e Mounting borehole
f Connecting plug
g Wall arm
h Mounting base
i Cable outlet
j "Easy Bracket" locking fixture
k OSD cover
Safety remarks
• With darkened environment and
direct view into the IR spotlight, a
safety distance of >1 m to the spot-
light must be maintained.
• Do not observe invisible LED beam
directly using optical instruments
(e.g. magnifying glass) as this can
pose a hazard to eyes, LED class 1M.
Mounting
2 Fasten the "Easy Bracket" fixture
on the wall, observing the mounting
position, with the retaining bracket
at the top.
Create the plug-in connection and
suspend the hook at the camera
on the retaining bracket of the wall
fixture. Fasten the camera using 4
Allen screws.
The "Easy Bracket" fixture is not
suitable for ceiling mounting. In this
case, the mounting base is screwed
directly into the ceiling.
3 Mount the sun guard and fix using
the fastening screws.
4 Adjust the pan and tilt angle.
5 Fix the camera setting using the
provided Allen key.
Setting the zoom and focusing
6 Take off the OSD cover, under
which is the joystick for controlling
the settings. The zoom and focus
can be set directly at the camera.
Other settings
Other camera settings can be car-
ried out using an OSD (On-Screen-
Display) menu. To carry out these
settings, the video signal of the
camera must be connected to a
monitor. The camera menu can be
seen on the monitor. The adjustable
menu points are described on the
next two pages.
Terminal assignment
+, –
Supply voltage
20–50 V DC
L/S
Coaxial connection
L = lead, S = shield
RS485+,
Data lines
RS485–
Warning!
This is a class A device. This device
may cause radio interference in
domestic environments. In this case,
the operator may be required to take
adequate measures.
Specifications
Colour system: PAL
Image pick-up: CCD sensor 1/4"
976 x 582 Pixel
Resolution: 700 TV lines
Lens: 3.8-45.6 mm
Mechanical adjustment range: 180°
horizontal/vertical
Continuous operation: suitable
Video output: 1 Vss at 75 Ohm
Operating voltage: 20–50 V DC
Operating current: max. 500 mA
Protection system: IP 67
Ambient temperature:
–20 °C to +50 °C
Dimensions (mm) W x H x D:
100 x 107.8 x 277
Care instructions
Clean the camera shade using a
soft scratch-proof cloth (such as
a glasses cleaning cloth, furniture
polishing duster or similar) soaked in
a mild soap solution. To ensure that
no stains or discoloration occur, the
cleaning agent must be rinsed off
leaving no residues.
Publicidad
