Settings - oneConcept TuneUp ST Manual De Instrucciones

EN
26

SETTINGS

The factory default name for the unit is AirMusic.
Device
You can change the name in the DLNA settings of
your computer or mobile device. Use the QR code to
download the AirMusic App. Information about the
device and the connected network can be displayed.
This information includes the MAC address.
You can choose from "Sleep Radio" (time to auto power
Menu
off), "Local Radio," "Internet Radio," "USB," "Alarm," and
"Timer" and have your selection displayed on the main
screen.
Wireless network setting: Enable/disable wireless
Network
network. When you enable the wireless network, the
unit automatically selects the AP you need. A WEP or
WPA password is required to connect the device to the
wireless network.
Wireless network setting (WPS PBC): If you use a
router with a WPS button, you can easily connect to
the network using the WPS function. Open the WPS
function and press the WPS button on your router
within 120 seconds. The connection between the router
and your device is established automatically.
Manual setting: You can select DHPC (with automatic
IP selection) or enter the IP address manually to
establish the wireless connection. If you select manual
setting, the following entries must be made: SSID
(name of access point), IP address, subnet mask,
default gateway, preferred DNS server, alternate DNS
server.
Network Check (Power On): Enables/disables the
wireless network. When you enable the wireless
network, the device automatically searches for
available AP. Select the required AP.