Pinnacle Products International MASTER SSR-808R-IHR Manual Del Usuario E Instrucciones De Operación página 6

1. Attach the mounting bracket to a wall stud as
shown below using the four (4) included
Tip: Use the back plate of the wall
mounting bracket as a template to
pre-drill the holes for the mounting screws.
Wall Mounting Bracket
Back Plate
Wall Mounting
CAUTION
continuously.
© 2015, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE
2''X4''
STUD
Screws
''X4''
CONNECTED TO A POWER SOURCE
Assembly
1. The heater support bracket is attached to the
heater body.
2. Attach heater support bracket to wall
mounting bracket using three (3) 10mm allen
Wall Mounting
Bracket
WARNING
AS DESCRIBED ABOVE ON A 2''X4''
5 Halogen Infrared Heater User's Manual
Heater Support Bracket
(Attached to Heater)
DO NOT MOUNT HEATER ON
THE CEILING. MOUNT ONLY