Responsibility Of The Owner And/Or User Of The Tool; Packaging; Important Safety Information And Safety Instructions - Monti BRISTLE BLASTER Instrucciones

ENG Operating instructions
1.

RESPONSIBILITY OF THE OWNER AND/OR USER OF THE TOOL

These operating instructions form part of the items supplied for the Bristle Blaster
tool, also if sold. The owner and/or user of the Bristle Blaster
placing the Bristle Blaster
The manufacturer is not liable for injuries or damage due to incorrect or improper usage of the Bristle Blaster
2.

PACKAGING

The packaging material must be disposed of in accordance with local regulations.
3.

IMPORTANT SAFETY INFORMATION AND SAFETY INSTRUCTIONS

The statutory health and safety regulations, generally recognised safety and occupational health rules, as well as
the health and safety regulations for power-driven equipment are to be observed. Any use beyond these limits is
considered incorrect. The manufacturer is not liable for any resulting damage. The operating instructions form part
of the items supplied and are to provided to the new user on the resale of Bristle Blaster
it is to be ensured that the Bristle Blaster
Qualified personnel are individuals who, due to their training, experience and instruction as well as their knowledge
of applicable standards, stipulations, health and safety regulations, are qualified to undertake the related necessary
actions and can identify and avoid possible hazards during this process.
The operating organisation must ensure that personnel tasked with operation, maintenance and servicing have read
and understood the operating instructions and follow all points in the instructions:
- To avert hazards for the life and limb of the user and others
- To ensure the reliability of the Bristle Blaster
- To prevent downtime and pollution due to incorrect actions.
The responsibilities for the work must be clearly defined and observed so that there are no unclear areas of author-
ity in relation to safety. The mechanical servicing tasks are to be undertaken at the stipulated intervals and with the
stipulated scope.
After maintenance tasks, all safety features removed must be correctly re-fitted. The safety features and their pro-
tective action must be checked by an expert prior to placing the tool in operation. Removing, disengaging and / or
bypassing safety features (covers, trim panels, starter switch, etc.) and/or safety guards can cause injury or damage
and are therefore strictly forbidden by the manufacturer!
The manufacturer provides a warranty for the Bristle Blaster
16
in operation.
®
is only operated, serviced or repaired by appropriately trained personnel.
®
and
®
and must always accompany this
®
must be familiar with the instructions for use before
®
in accordance with its general terms and conditions.
®
Bristle Blaster Electric
®
.
®
. To ensure safe operation,
®