mybeo 303262 Manual Del Usuario página 24

6. Determine the height. Use the "Selection" button on the scales to determine
the height of the person whose profile is being created.
Note: If you make a mistake while configuring the data, then you have to reconfi-
gure the whole profile.
Measuring the body fat and weight
After making the settings or configuring the appropriate profiles, press the "SET"
button and select the previously configured data profile using the "Selection"
button. Stand on the scales once "0.0" is shown on the display.
Note: Your heels should be placed on the electrodes of the scales to ensure that
the data is read accurately. If you do not stand on the scales within 10 seconds
after "0.0" is displayed, it switches off thanks to the automatic power saving
function.
Displaying additional values
After the weighing process is completed, the scales first displays your weight.
Remain standing on the scales and the display shows "0000" in sequence from
left to right. Your body fat percentage, water content, muscle mass, bone mass
and the calories will then be displayed one after another. The values are displayed
twice alternately. A symbol which indicates an approximate assessment of your
weight compared to the default values is shown below the displayed value. When
the symbol is on the left side, this signifies "underweight". If the symbol is in the
middle, this signifies "normal". If the symbol is on the right side, this signifies
"overweight".
24
English