Package Contents - VWR Power Source 300V Manual Del Usuario

Avoiding Damage to the Instrument
1. For proper ventilation, leave at least 10 cm of space behind the instrument, and at least 5
cm of space on each side.
2. Do not operate the power supply in high humidity environments (> 95%), or where
condensation may occur.
3. To avoid condensation after operating the power supply in a cold room, seal the unit in a
plastic bag and allow at least 2 hours for the unit to equilibrate to room temperature before
removing the bag and operating the unit.
Symbols
Used on the 300V Power Supply to indicate an area where a potential shock
hazard may exist.

Package Contents

Component
300V Power Supply
Instruction Manual
Extra Fuse
Power Cord
Warranty Card
Quick Reference Card
Upon Receiving the Instrument
Examine the unit carefully for any damage incurred during transit. Any damage claims must be
filed with the carrier. The warranty does not cover in-transit damage.
To ensure safe, reliable operation, always operate the 300V Power Supply in
accordance with the manufacturer's instructions. Always wear protective
gloves and safety glasses when working in a laboratory environment. See
Safety Information and Warranty Information in this manual.
1/28/2015
Revision 1.0
Quantity
1 each
1 each
1 each
1 each
1 each
1 each
4