Mopar 4280345 Manual Del Usuario página 10

10
44. Using a trim stick C­4755 or equivalent, separate the
steering column trim ring (1).
45. Place the headlamp switch (1) rotary knob (4) in the
OFF (O) position.
46. Push in on the rotary knob to engage the switch re­
tainer (2) retractor mechanism.
47. Still holding the switch rotary knob depressed, rotate
the knob clockwise toward the park lamps ON posi­
tion to retract the two switch retainers. The retainers
will be fully retracted before the rotary knob actually
reaches the park lamps ON position.
48. With the switch rotary knob still in the retainer retractor
position, pull the switch out of the cylinder­like mount­
ing hole far enough to access and disconnect the in­
strument panel wire harness connector from the con­
nector receptacle (3) on the back of the switch hous­
ing.
49. Remove the headlamp switch (1) from the instrument
panel.
50. Using a trim stick C­4755 or equivalent, separate and
remove the center trim (2).
Nov 22, 2010
4280345
K6860941