NUTRIBULLET 600 Serie Manual Del Usuario página 3

Never store a blade in de power base without a blending cup attached! Never blend without liquid
as doing so may damage the blend blade!
TO PREVENT LEAKAGE and to avoid the risk that residue builds up and damages the power base, always
make sure:
• the blade is undamaged and its gasket is completely seated in the blade;
• the blade is securely screwed onto the blending container BEFORE placing it on the power base
and operating the NutriBullet .
®
• the ingredients do not extend above the MAX line.
• NEVER BLEND WITHOUT LIQUID AS DOING SO MAY DAMAGE THE BLEND BLADE. The
Cyclonic Action® of your NutriBullet® requires the use of liquids to make NutriBlasts® and other
nutritious beverages.
• The NutriBullet® is not intended to be used as an ice crusher or without liquids. To make cold drinks,
we suggest to use frozen fruit and chilled liquids. Alternatively, you may add crushed ice up to 25% of
the total cup volume, with water or other liquid filled up to the MAX line. For NutriBullet® MAX see
the MAX line at the inner side of the stainless steel vessel.
• DO NOT USE the blend blade for grinding dry ingredients such as grains, cereals, coffee beans etc. as
this may damage the motor and the blade.
• Once you have stopped your NutriBullet®, carefully remove the blending cup/blade assembly, the
motor comes to a stop and the unit powers down.
IMPORTANT!
We recommend replacing the blades every six months or as needed to maintain optimal performance.
MICROWAVE & STOVE-TOP HEATING SAFETY
After blending room temperature or cooler ingredients, transfer mixture to an unsealed microwave-safe
container or to a stove-top pot to heat. Do not place any of the NutriBullet parts in a microwave oven,
stove-top pot or immerse in boiling water as this may result in damage to the accessory.
CLEANING & USER MAINTENANCE INSTRUCTIONS
Cleaning your NutriBullet is so easy... simply place any of the pieces (except for the power base and
blades!) on the top shelf of the dishwasher or rinse/hand wash with warm soapy water.
HERE'S HOW TO CLEAN YOUR NUTRIBULLET:
STEP 1: The most important thing — ALWAYS UNPLUG the power base from the power supply outlet.
STEP 2: Make sure the blending cup/blade assembly is not attached to the power base.
STEP 3: Now clean the individual components:
POWER BASE - for the most part, the power base doesn't really get dirty, but if you neglect to twist the
blend blade on to the cup tightly, liquids can leak out and get into the base. Please:
• Do not remove the white liners inside the power base.
*NutriBullet ® Balance: remove the Smart Nutrition SensorTM from the power base and wipe with a
damp cloth until clean.
• Use a sponge/cloth moistened with warm (soapy) water to wipe down the inside well and outside until
clean.
Balance: replace the Smart Nutrition SensorTM by lining up the arrow on the disc to the
*NutriBullet ®
arrow in the well of the power base. Gently press down until the disc is level.
• Please pay particular attention to the actuator tabs to loosen any sticky debris from drips and spills. If
necessary you may use a small brush to ensure it is kept clean.
• NEVER submerge the power base in water or put it in the dishwasher!
4
*The NutriBullet Balance is equipped with a Smart Nutrition Sensor
®
scale. Handle with care. If it is dropped or jarred, it may impact the calibration causing it not to connect or detect
the placement of the cup. If this occurs, please contact customer service via NutriLiving.shop.
BLADES:
• Rinse in warm water immediately after each use to prevent debris from drying on the blades and gasket.
• NEVER wash blades in the dishwasher, elevated temperatures warp the plastic and damage the gasket.
• NEVER remove the gasket as this may permanently damage the blade and cause leakage. If after
washing as indicated additional disinfecting is desired, you may rinse with a 10% vinegar/water solution
or with lemon juice.
• Dry both sides of the blade completely.
• If, over time, the gasket becomes loose or damaged, you may order a new blade at NutriLiving.shop.
• Replace your blade every 6 months for optimal performance.
NUTRIBULLET ACCESSORIES:
Cups, pitchers, lids and liprings are all TOP RACK dishwasher safe. We recommend rinsing them and giving
them a quick brush with a dish brush to remove any dried debris before washing them in the dishwasher.
NEVER use the sanitize cycle to wash the blending containers as this may warp the plastic.
STUBBORN CLEAN UP
If ingredients dry inside the NutriBullet containers, make your cleanup a snap by filling it about 2/3 full with
room temperature (21°C or less) water and screw on the extractor blade. Place the blending container/
extractor blade assembly on the power base for about 20-30 seconds. This will loosen the stuck ingredients,
and with a light scrub and rinse, you'll be all done.
SAVE THESE INSTRUCTIONS - FOR HOUSEHOLD USE ONLY
Warranty: two year against factory and material defects. This warranty does not affect applicable legal
rights.
IF YOU HAVE ANY COMMENTS, QUESTIONS OR CONCERNS, PLEASE GO TO NUTRILIVING.SHOP
or send an email to: info@nutribulletretail.com. Need service? Contact service@nutribulletretail.com
FAQ's:
www.nutribullet.com
www.nutriliving.shop
www.nutribullet.nu
@NutriBullet (US) or @NutriBullet.NL /.SE /.DK / .NO / .FI
On social media we take you on a discovery in the world of smoothies, and more! With this hashtag you will
find numerous tips, trics and accessible recipes that you can make with your NutriBullet. It will undoubtedly
inspire you to get started yourself.
THIS MARKING INDICATES THAT THIS PRODUCT SHOULD NOT BE DISPOSED WITH OTHER HOUSEHOLD WASTES THROUGHOUT THE EU. TO
PREVENT POSSIBLE HARM TO THE ENVIRONMENT OR HUMAN HEALTH FROM UNCONTROLLED WASTE DISPOSAL, RECYCLE IT RESPONSIBLY TO
PROMOTE THE SUSTAINABLE REUSE OF MATERIAL RESOURCES. TO RETURN YOUR USED DEVICE. PLEASE USE THE RETURN AND COLLECTION
SYSTEMS OR CONTACT THE RETAILER WHERE THE PRODUCT WAS PURCHASED. THEY WILL TAKE CARE FOR ENVIRONMENTAL SAFE RECYCLING.
which includes a delicately calibrated
TM
5