BLACK&DECKER NV2410N Manual De Instrucciones página 9

x
The charger automatically shuts off if the ambi-
ent temperature becomes too high. As a con-
sequence the charger will be inoperable. The
charging base must be disconnected from the
mains supply and taken to an authorised service
centre for repair.
$
The charging base is intended for indoor use
only.
Features
This tool includes some or all of the following features.
1. On/off switch
2. Bowl release button
3. Dust bowl
4. Charger
5. Charging bracket
Fig. A
6. Dry pick up cloth filter (NV2410N, NV2420N, NV3610N, NV3620N, NV4820N,
NV4820CN & NV7210N Only)
7. Pre-filter (NV2410N, NV2420N, NV3610N, NV3620N, NV4820N, NV4820CN &
NV7210N Only)
8. Wet/Dry foam insert (NW3620N & NW4820N Only)
9. Wet/Dry deflector (NW3620N & NW4820N Only)
Fig. B
10. Squeegee (NW3620N & NW4820N Only)
11. Brush tool (NV2420N, NV3620N, NV4820N & NV4820CN Only)
12. Crevice tool (NV2420N, NV3620N, NV4820N & NV4820CN Only)
Note: The accessories can be stored by fitting them into the front of the appliance. For
models that are supplied with both a brush and a crevice tool, first fit the brush into the
front of the appliance then fit the crevice tool into the brush for storage.
Installation
Wall Mounting (fig. C)
The product can be attached to a wall to provide a convenient storage and charging
point for the appliance.
When fixing to a wall, make sure that the fixing method is suitable for the wall type and
is appropriate to the weight of the appliance.
Mark the location of the screw holes (within reach of an electrical outlet for charging
u
the vac while it is on the wall bracket).
Fix the mounting bracket to the wall using appropriate scres and plugs for the type
u
of wall and weight of the appliance.
Hang the appliance on the wall by placing the opening on the base of the vac over
u
the hooks in the wall mount charging bracket.
(Original instructions)
ENGLISH
9