Important Information
1
Important Information
1.1
General Information
The Piston Pump CR-KP292 conforms to the following directives:
2006 / 42 / EC
2004 / 108 / EC
97 / 23 / EC
2014 / 29 EU
The CE sign is located on the rating plate.
Observe the binding national and local regulations when fitting the pump into installations!
1.2
Target Groups
This Operating Manual is intended for the personnel planning, operating and maintaining
Piston Pump.
This group of people includes:
Designers and fitters of vacuum apparatus
Employees working on commercial laboratory and industrial vacuum technology applica-
tions
Service personnel for Piston Pumps
The personnel operating and maintaining the Piston Pump must have the technical compe-
tence required to perform the work that has to be done.
The user must authorize the operating personnel to do the work that has to be done.
The personnel must have read and understood the complete Operating Manual before using
the Piston Pump.
The Operating Manual must be kept at the place of use and be available to the personnel
when required.
1.3
Intended Use
The layout of the Piston Pump must be appropriate for the conditions of use. The user
bears the sole responsibility for this.
The Piston Pump may only be operated under the conditions stated
in the "Technical Data" section,
on the type plate, and
in the technical specification for the order concerned.
The Piston Pump is approved for extracting, pumping and compressing gases and
vapours. If these gases and vapours are toxic or explosive, then the user must observe
the currently valid safety regulations for this application.
1.4
Use for an Unauthorized Purpose
It is forbidden to use the pump for applications deviating from the technical data stated on
the type plate or the conditions stated in the supply contract, or to operate it with missing or
defective protective devices.
4
Machinery Directive
Electromagnetic Compatibility Directive
Pressure Equipment Directive
Simple Pressure Vessels Directive