Intended Use - Boso Bosch+Sohn bosotherm 5100 Instrucciones Para El Uso

• When wearing the protective eyewear, people with sensitive skin may have an allergic reaction to the materials
of the eyewear that may come into contact with the skin.
• Make sure that the protective eyewear does not come into contact with grease, oils or alcohol (e.g. cleaning
products or facial toners).
• Please note that the protective eyewear is opaque, which means it will restrict your spacial awareness.
• Do NOT operate the infrared lamp whilst wearing the protective eyewear.
• Do NOT move about whilst wearing the protective eyewear.
• Make sure that you do NOT reduce the distance between you and the infrared lamp whilst wearing the protec-
tive eyewear.
• Use the protective eyewear only in quiet environments, so that you are not disturbed during use.

Intended use

The protective eyewear is exclusively intended for protecting your eyes against infrared radiation while using an
infrared lamp. The protective eyewear provides protection against infrared radiation only. The protective eyewear
does NOT provide protection against other types of radiation. Use the protective eyewear only with boso infrared
lamps. Never use the protective eyewear with infrared lamps from other manufacturers.
Always use the protective eyewear directly over your eyes, not over another pair of glasses. The protective eye-
wear is intended for domestic/private use only, not for commercial use. It is free from pollutants as per the legal
requirements. The material of the protective eyewear may initially smell. This smell will dissipate after a few uses.
Usage
1. Position the infrared lamp.
2. Prepare the desired treatment distance.
3. Switch on the infrared lamp.
4. Sit down in preparation for the application.
5. Hold the protective eyewear to your eyes and pull the rubber band over your head. To make the rubber band
longer/shorter, pull on the strap at the side.
6. To end the application, first take off the protective eyewear. Then switch off the infrared lamp.
Replace the product after a period of use of 3 years.
Storage
If you do not plan to use the protective eyewear for an extended period of time, we recommend storing it in its
original packaging in a dry environment, ensuring that it is not weighed down by other items.
leaning
C
Clean the protective eyewear from time to time. Use a slightly damp, soft cloth to clean it. Do not use any sharp
or abrasive cleaning products.
echnical dat
T a
Model
Protection level
Protective eyewear designation
Light transmission level
Maximum average spectral
trans mittance value with infrared
Hans Dinstlage GmbH
Riedlinger Straße 28
88524 Uttenweiler, GERMANY
SEP 01
4 -10 in accordance with EN 171:2002
4-10 HAD CE
The code for the lenses is comprised of the following:
- Initial number for IR protection filter
(1st part of code)
- Protection level number
(2nd part of code)
- Manufacturer's code
(3rd part of code)
- CE mark (4th part of code)
Max. 0.023%
Min. 0.0085%
780 – 1400 nm: 0.050%
780 – 2000 nm: 1.3%
13