Mellerware 30510 Guia De Inicio Rapido página 2

1. Fitting the new filter:
Step 1: Remove the filter from its packing and check if
it's in good condition.
Step 2: Detach and remove the top cover from the puri-
fier. Insert the new filter element in the base by gently
pushing it down.
Step 3: before placing the top cover and tightening the
cover to the base; make sure that the waterproof ring is
in position in the groove
2. Filter lifespan
2.1. It is recommended that each Ceramic filter filters
up to 2000 liters of water. You can purchase replace-
ment filters at leading retailers nationally.
PLEASE REFER TO INSTRUCTION MANUAL
SUPPLIED WITH TAP UNIT.