TOYAMA TE700 Manual Del Propietário página 15

 When we clench the handle lock, clutch handle is opened, clutch is
connected. In the condition, power is transmitted to tiller, blades begin to
work. (Look at picture 7).
Handlebar
lock
Picture 6
4. Gear Choice:
 Gear box has 5 gears, including neutral position. The gears are optional
(Look at Table 5)
Gear box
Transmission speed(km/h)
Forward
slow Fast Neutral
4.83 2.55
Change gear
 Counterclockwise turn the throttle switch to the right position (mini).
 Clench clutch handlebar, and make clutch open.
 Change shift lever to the gear you need.
 Loosen clutch handlebar, make machine into the changed gear, then
open the throttle to increase the speed into the work.
 If necessary, we may start engine to check if clutch can work.
Clutch
handlebar
Stop Back
fast slow
X 3.45
Picture 7
Tilling box(Using with chain box together)
Blades rotary speed (rpm)
Fast
fast slow
1.82 553 299
Table 5
Stop Slow
Neutral fast
X 311
slow
168
15