Connecting A Door Lock (Not Included); Connecting A Gate Opener (Not Included); Basic Functions; Screen Icons - Byron DIC-24615 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
Instruction manual

3.3.5 Connecting a door lock (not included)

It is possible to connect a lock to the outdoor unit that can be opened,
using the monitor. Door locks are sold separately. Article no: DB5005
& DB5005L
To connect the door lock, you will need the following tool:
ü A small flat head screw driver.
ü You can only use the door lock when it is connected to an
extended AC power transformer (min 12V).
ü Consult the manual of the door lock for further explanation on
installation.
A. On the outdoor unit: Loosen the green terminal screws. (see
sticker on the outdoor unit for position)
B. Insert the wires (See sticker on the outdoor unit for position)
C. Fasten the terminal screws.
D. On the lock: Loosen the 2 terminal screws.
E. Insert the wires (any order)
F. Fasten the terminal screws.

3.3.6 Connecting a gate opener (not included)

It is possible to connect a gate opener to the outdoor unit that can be
opened using the indoor unit (monitor).
To connect the gate opener, you will need the following tool:
ü A small flat head screw driver.
ü You can only use the gate opener when it is connected to an
extended AC power transformer (min 12V).
ü Consult the manual of the door lock for further explanation on
installation.
6
A. On the outdoor unit: Loosen the blue terminal screws. (see sticker
on the outdoor unit for position)
B. Insert the wires. (see sticker on the outdoor unit for position)
ð It is important that the + and – wires are in the correct position.
A. Fasten the terminal screws.
B. On the gate opener: (See the manual provided with your gate
opener.)
3.3.7 Connecting the external antenna (not
included)
The internal antenna is sufficient in most cases but can be extended
using the external antenna.
Attach the external antenna to the outdoor unit and turn the switch (8)
at the back of the outdoor unit.
4

Basic functions

4.1

SCREEN ICONS

1. Signal strength
2. SD card inserted
3. a) Outdoor unit powered by battery
b) Outdoor unit powered by power adapter
4. a) Video recording
b) Picture captured
5. a) Indoor unit powered by battery
b) Indoor unit powered by power adapter

Publicidad

Tabla de contenido
loading

Tabla de contenido