If you do not set the key, the wireless security function is still
If you do not set the key, the wireless security function is still
disabled even if you have selected Shared Key as Authentication
disabled even if you have selected Shared Key as Authentication
Type.
Type.
These values must be identical on all wireless
stations in your network.
• Key Type - You can select the WEP key length
(64-bit, or 128-bit, or 152-bit.) for encryption.
"Disabled" means this WEP key entry is invalid.
1) For 64-bit encryption - You can enter 10
hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or
5 ASCII characters.
2) For 128-bit encryption - You can enter
26 hexadecimal digits (any combination of
0-9, a-f, A-F, zero key is not permitted) or 13
ASCII characters.
3) For 152-bit encryption - You can enter
32 hexadecimal digits (any combination of
0-9, a-f, A-F, zero key is not permitted) or 16
ASCII characters.
ENGLISH-33