Installation; Storage And Dismantling; Selecting The Place Of Installation; Positioning - IARP EXCITE Instrucciones De Empleo Y Manutención

7. INSTALLATION

7.1 STORAGE AND DISMANTLING

WARNING! Use protective gloves during unpacking and installation
operations.
During unloading and movement operations, avoid tilting the machine and avoid
sudden manoeuvres.
Keep all packaging away from children.
Carefully remove the packaging, taking care not to damage the components and
not to throw away those that will be needed for assembly.

7.2 SELECTING THE PLACE OF INSTALLATION

In selecting the place of installation, ensure that the following instructions are observed, this being vital for proper and
troublefree working of the cabinet:
• Do not install the cabinet outdoors.
• Do not install the cabinet in the vicinity of heating radiators or other heat sources.
• Do not install the cabint where it is exposed to direct sun light (e.g. through
windows).
• Do not install the cabinet where it is exposed to drafts from ventilators open
doors.
• Pay attention to air outlet from air conditioners/ ventilators.
• Keep the air intake and outlet area around the plinth area of the cabinet clear
of cartons and other obstacles.
• It is necessary taht the condensing unit obtains a good circulation of air around
it; also the area around the condensing unit should not be obstructed by boxes
or other objects; keep a distance from the wall of 10 cm. at least.

7.3 POSITIONING

The equipment is fitted with 2 adjustable feet.
To stop and position the equipment, screw in or out the feet.
It is strictly necessary after positioning to stabilise the equipment on the ground.
Air-Condition
ADJUSTABLE FEET
-22-