AKWA 18-20 SMART UNDER Manual Para La Instalacion, Uso Y Mantenimiento página 20

3. INSTALLING
CAUTION
The appliance must be installed by specialist personnel.
If the appliance is not installed by specialist personnel, it may not work correctly.
If the appliance is not installed by specialist personnel, there is a risk of flooding the place of installation.
3.1 Installing the tap
Fix the tap on the sink and then connect it to the appliance, following the given pattern:
Connection with sparkling water
CAUTION
If using a 3- or 5-way tap and connecting without sparkling water, take care to close the sparkling water pipe
fully to prevent water leaks during dispensing.
Water symbols
water at room temperature
3.2 Connecting to the water supply
CAUTION
Connect the appliance to the cold water supply!
Never connect the appliance to the hot water supply.
Install a system stopcock, an anti-flooding device and a check valve on the connection point to the water
supply, as in the following scheme:
|
E N 20
3-way tap
(in addition to the one already
present)
5-way tap
(to replace the one
already present)
Hot water from the mains
Cold water from the mains
cold water
Connection without sparkling water
2-way tap
(in addition to the one already
present)
4-way tap
(to replace the one
already present)
Hot water from the mains
Cold water from the mains
sparkling water