Inserting And Replacing The Filter - AKWA 18-20 SMART UNDER Manual Para La Instalacion, Uso Y Mantenimiento

4. INSERTING AND REPLACING THE FILTER

INSERTING A NEW FILTER
Remove the packaging from the new filter. Note the date of the installation of the filter using a permanent
marker. To insert the filter, push upwards into position and turn in an anti-clockwise direction
When the filter has been replaced, press and hold the sanitization button until an acoustic alarm sound
to start the device.
Drain a few litres of water after inserting the filter before drinking.
REPLACEMENT OF THE FILTER
CAUTION
The filter should be replaced when the number of litres equal to the stated capacity has been dispensed, when
the stated maximum time of use has passed or when a
The filter should be replaced every time you perform the sanitization of the applicance.
To remove the filter, turn it in a clockwise direction.
|
E N 22
reduction in the flow of cold or filtered water is noticed.
Insert then the new filter.