- Press the button
level. The indicator will light up green. Press the button
again and the heating will stop. The green indicator
11
will turn off.
- Press the button
level. The indicator will light up red. Press the button
again and the heating will stop. The red indicator will
turn off.
- Set any of the 5 factory-stored positions to a new
position:
• Once the bed is in the desired position, press the SET
button until the blue indicator lights up.
• While the blue indicator is lit, press one of the five
buttons (P1, P2, P3, P4, P5) for where you want to
memorise the new position.
• The new position will be memorised in the selected
button.
● Integrated foot control
1
- Adjusting height
• Use buttons A and B of the foot control
the height of the bed.
ON/OFF
switch
- Adjusting backrest tilt
• Use buttons A and B of the foot control
the tilt of the backrest.
EN
4
11
and the heating will start at normal
12
and the heating will start at high
2
3
4
to adjust
1
to adjust
2
- Adjusting seat tilt
• Use buttons A and B of the foot control
the tilt of the seat.
12
- Adjusting footrest tilt
• Use buttons A and B of the foot control
the tilt of the footrest.
● Manual functions
- Adjusting headrest
• Unscrew Knob A to adjust the height.
• Move the headrest to achieve the desired height and
then screw Knob A tight.
• Unscrew Knob B to adjust the headrest in terms of tilt
and/or moving its position forwards or backwards.
• Move the headrest to achieve the desired position and
then screw Knob B tight.
- Adjusting footrest
• Unscrew the clamping knob to adjust the footrest
lengthwise.
3
to adjust
4
to adjust
Knob B
Knob A