Rear Panel; Control Panel - Sonia Maia High H2301 Manual De Instrucciones

COMPONENTS
1 2
1
Electrode hose
2
High frequency handpiece
3 High frequency cable connector
4 High frequency flexible cable
This device also incorporates four different types of
glass electrodes:
● Mushroom-shaped electrode
● Spoon-shaped electrode
● Ball-shaped electrode
● Straight electrode

CONTROL PANEL

1 2 3 4 5
1
Timer
2
Increase time button
3
Decrease time button
4
Power on indicator
5
On / off button
6
Run indicator
7 Start / Stop button
3 4
6 7 8 9 10 11
8
Pause indicator
9
Decrease power button
10
Increase power button
11 Power display

REAR PANEL

1
1
High frequency handpiece cable connection
2
Power supply switch
3 Electrical power supply connector
4 Fuse
CONNECTION AND ASSEMBLY
INSTRUCTIONS
1 2
1
Glass part of the electrode
2
Metal part of the electrode
● During assembly and disassembly of the high
frequency electrode, handle the area marked with a
dashed line, keeping a distance of 30 mm from the
metal part of the electrode.
- Connect the power cable to the rear panel of
the main body.
- Connect the cable of the high frequency
handpiece to the corresponding output on the
rear panel.
POWER AND CONFIGURATION
● Turn on the power switch on the rear of the
machine and press
The power indicator
will be in standby mode and ready for operation. On
the control panel:
- The timer will show 15 minutes.
- The power indicator will show 1.
2 4 3
on the control panel.
will light up. The machine
3