Rear Panel; Control Panel - Sonia Maia Brush H2601 Manual De Instrucciones

COMPONENTS
Brush handpiece
1 2
1
Head
2
Handpiece
3
Brush cable connection
4 Brush flexible hose
Brushes
1 2 3
1
Small pumice stone brush
2
Small brush
3
Large pumice stone brush
4
EVA rubber brush
5
Large brush 1
6
Large brush 2

CONTROL PANEL

14 13 12
1 2 3 4 5
1
Power on indicator
2
On / off button
3
Selection of brush rotation direction
4
Power on indicator
5
Start / Stop button
3 4
4 5 6
11 10 9
6 7 8
6 Pause indicator
7
Clockwise rotation indicator
8
Anti-clockwise rotation indicator
9
Speed display
10
Decrease speed button
11
Increase speed button
12
Increase time button
13
Decrease time button
14
Timer

REAR PANEL

1
1 Brush cable connection
2 Power supply switch
3
Electrical power supply connector
4
Fuse
CONNECTION AND ASSEMBLY
INSTRUCTIONS
● Connect the power cable to the rear panel of the
main body.
● Connect the brush handpiece cable to the
corresponding outlet on the rear panel.
● Choose 1 brush and connect it to the brush
handpiece for use.
● To change the brush:
- Hold the handpiece of the brush with one hand
and the plastic part of the brush with the other.
- Pull out until you hear a click and the brush will
come off.
- Place the new brush by pushing in until you hear
a click.
POWER AND CONFIGURATION
● Turn on the power switch on the rear of the
machine and press
The power indicator
will be in standby mode and ready for operation. On
2 4 3
on the control panel.
will light up. The machine
EN
3