Troubleshooting - Vacmaster VSH01 Guía De Uso Y Cuidado

Should you have any problem(s) with your vacuum cleaner, review the table
below for solutions to minor performance issues.
WARNING
Disconnect electrical supply before performing maintenance to the vacuum
cleaner. Failure to do so could result in electrical shock or personal injury.
PROBLEM
Vacuum will not power on.
The job of dirt pick-up is
poor or suction power is
weak.

TROUBLESHOOTING

POSSIBLE CAUSE
The plug is not plugged to
the wall outlet.
The On/Off switch is not
pressed to the 'I' ON
position.
The vacuum body is
overheated.
The motor is damaged.
Dust cup is full.
Filter needs cleaning.
Filter needs to be
replaced.
There is a clog in the
vacuum.
Dust cup is not installed
well.
The dust release button is
not locked into place.
-18-
SOLUTION
Be sure power cord plug is
fully plugged into outlet.
Press the on/off switch to
the 'I' ON position.
Unplug the power cord
and let the vacuum cool
down for 50 minutes.
Call (866) 384-8432 for
assistance.
Empty dust cup.
Follow filter cleaning
instructions on page 15.
To purchase online at
www.vacmaster.com or
call (866) 384-8432.
Check the nozzle and dust
cup for clogs and remove
accordingly.
Check dust cup for correct
installation and ensure it is
snapped firmly in place.
Check and ensure it is
locked firmly into place.