Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CHANNELS 1-4
1.- Mic input
XLR balanced, low-impedance
channel input optimized for
microphones. Can receive balanced
and impedance signals.
2.- Line input
¼" balanced TRS inputs. Can use it
as non-balanced input. Can receive
balanced and impedance signals.
The mic input and the line input
cannot be used simultaneously
within the same channel.
3.- Mic switch
Choose between the mic input
signal and the line input signal. Has
a 40dB attenuation level.
4.- Peaks
The peak LED illuminates when a
channel is going into overload.
5.- Gain control
Allow one to set the dB input level.
40dB range.
6.- High-pass fi lter switch
Removes the low frequencies
signals below 100Hz
7.- High EQ
Set the high frequency levels
(+15dB). Attenuation level of 10kHz,
remove noise or add brilliance to the
signal depending on the quality of
the source.
8.- Mid frequency EQ
Set the middle frequency levels
(350Hz to 8kHz)
ENGLISH-4
Publicidad
Tabla de contenido
