Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
9.- Mid tone EQ
Set the middle tones level (+15dB)
(350Hz to 8kHz)
10.- Low EQ
Set the bass frequency level. Add
depth to thin-sounding signals.
As with any EQ, use sparingly.
Too much of this Q can give you a
booming bottom end.
11.- Aux 1
Control the signal level of the
auxiliary 1 channel.
12.- Aux 2
Control the signal level of the
auxiliary 2 channel and the effect of
the each line.
13.- Pan
Set the audio signal balance, right
channel / left channel. If you want
to hear both channels, put the knob
on the middle of stage. If you want
to hear only the right channel, move
the knob to the right; of you want to
hear the left channel, move the knob
to the left of the stage.
14.- Volume
Set the volume level for each
channel.
ENGLISH-5
Publicidad
Tabla de contenido
