Before using your new 4 channel digital video recorder,
please read this instruction manual to prevent any damage.
Put it away in a safe place for future references.
This device must be placed in a place with adequate ventilation,
without humidity, without dust, and out of direct sunlight.
Always use a clean, dry, and soft rag in order to clean this device
•
4 inputs for cameras with BNC connector
•
2 outputs for monitor with BNC connector
•
NTSC / PAL system selector
•
Video Loss alarm
•
Motion detection with area setting
•
Interface for ATA-100 hard disk (hard disk not included)
•
Remote control
1
11
2
1.- Power LED
Lights on when the device is in use
2.- HDD LED
Lights on when the HD is in use
3.- Channel 1
Allows you to choose the plugged camera to channel 1
4.- Channel 2
Allows you to choose the plugged camera to channel 2
IMPORTANT
MAIN FEATURES
FRONTAL PANEL
3
4
5
12
13
14 15
ENGLISH-2
6
7
8 9
16
17
19
18
10