Steren CCTV-950 Manual De Instrucciones página 45

Record Schedule
Use this option to set a record schedule per day. You can choose
from time, sensor or motion recording.
--
T
A
This option works with a wide variety of external devices such
as PIRs, gas sensors, etc. The recorder will not record until the
external sensor will be triggered.
To select a time, use Up / Down buttons, then use SEL / EDIT to
change the parameter and finally press Menu to leave the menu
and store the changes.
Submenu
Auto Record
Activate the function (ON) if you want to record
automatically after 5 minutes without any operation. To
turn the function off, select OFF.
No recording
Continuous Recording (default option)
Recording triggered by sensor or motion
ENGLISH-13