Cleaning And Maintenance - Hkoenig U600 Manual De Utilización

Cleaning and maintenance

1. Unplug the unit before cleaning and maintenance.
2. Do not clean the machine with water jet.
3. Dust and mud on the mat can be cleaned by simply taken
it out from the machine and have it washed or cleaned by
vacuum cleaner.It is a good practice and important for
safety to have the mat dry thoroughly in cool area before
putting it back to the machine.Do not dry the mat under
strong sunshine nor in hot area.
4. When changing brush is seemed necessary ,unscrew the
fixing screw on the brush and pull it sideway to take it out
from the shaft.Replace the brush following the reversed
procedure.Remember to have the screw fixed on the flat
D-cut surface of the motor shaft.
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at the end of life separately from your household waste. There are
separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the
product.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France www.hkoenig.com - sav@hkoenig.com -
contact@hkoenig.com - Tél: +33 1 64 67 00 05