Remote Control - Steren DVD-100 Manual Del Usuario

INSTALLATION OF THE BATTERIES IN THE

REMOTE CONTROL

1. Remove the cover on the battery compartment which is
located on the back of the remote control.
2. Insert 2 AAA batteries, making sure that the polarity is aligned
correctly according to the diagram which is drawn on the inside
of the battery compartment.
3. Replace the cover on the battery compartment.
Important Information about the Batteries
• If you will not be using the remote control for an extended
period of time (more than one month), make sure to remove
the batteries from the remote control in order to save battery
life and to avoid malfunctions.
• Do not mix different types of batteries
Pointing the Remote Control in the Proper Direction
When you want the remote control to operate the DVD player,
point it towards the DVD player and not towards the TV. The
remote control must be directed in the correct direction where
the device is located in order to assure that the signal reaches
the signal receiver on the DVD player.
Make sure that there are no obstacles between the remote
control and the DVD player. If there are obstacles, the remote
control may not work properly.
Power the TV and DVD player on
1. Power the TV on and place it on the channel that is used for
video inputs
2. Press the POWER button on the remote control or on the DVD
device in order to power the DVD player on.
REMOTE CONTROL
1
1. Power
Powers the DVD player on/off
2
2. Display
Displays disc information
3. Settings 3
Press this button in order to enter the settings menu
ENGLISH-11