Initial Setup; Bluetooth Operation - Crosley CR3039A Manual De Instrucciones

Altavoz bluetooth rondo
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect the USB Cable to the Power Jack of the unit.
Charging/Power Source
1. This unit has a built in rechargeable battery.
2. Connect to a PC, Laptop or 5V USB adaptor with the provided USB cable.
3. The Charging Indicator will be red when charging, and change to green when
fully charged.

Bluetooth Operation

1. Long press the
flashing blue.
2. Turn on the Bluetooth feature of your audio device, search for "CROSLEY
CR3039A" and pair.
3. Once your device is successfully paired with the unit you will hear a short
confirmation sound from the unit.
4. Play and stream music from your device to the unit.
5. During the playback, short press the
playback.
6. During the playback, short press the + Button or the - Button for the previous
or next song.
USB/SD Playback
1. Insert a USB device into the USB port or a SD memory card into the SD card
slot.
Note: If the unit is on, the playback will start automatically.
2. Short press the
3. To Forward Skip, short press the + button.
4. To Backward Skip, long press the - button.
5. To stop and resume the playback, short press the
Note:
Only use 32 GB or smaller USB or SD memory card
button to turn on the unit. The LED indicator will start
button twice to select the USB or SD mode.
button to suspend and resume
button.
5

Publicidad

Tabla de contenido
loading

Tabla de contenido