Initial Setup; Charging The Speaker; Bluetooth Operation - Crosley CR3112A Manual De Instrucciones

English

Initial Setup

Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Plug the small end of Micro USB Cable into the Power Jack.
3. Plug the bigger end of USB Cable into either a computer's USB jack, or a
USB wall charging block (DC output 5V, 2.1A, not included) for power.
4. Fully charge the battery before the first use.

Charging the Speaker

1. This unit has a built in rechargeable battery.
2. Connect to a PC, Laptop or 5V,2.1A USB charging block with the provided
USB cable.
3. There are four battery indicators and when the unit is fully charged all four will
be illuminated.

Bluetooth Operation

1. Press the Mode Button repeatedly to select the Bluetooth mode, you will hear
an activation sound from the unit.
Note: The Function Indicator will be blue.
2. Turn on the Bluetooth feature of your audio device, search for "CROSLEY
CR3112A" and pair.
3. Once your device is successfully paired with the unit, you will hear a short
confirmation sound from the unit, and the function indicator will be blue.
4. Play and stream music from your device to the unit.
5. During playback, press the Play/Pause Button to suspend and resume song.
6. During playback, press the Backward Skip Button or the Forward Skip Button
for the previous or next song.
Note: Bluetooth version - *5.0*
5