Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
Information
 Read these instructions through completely before assembling your product in order to avoid
errors in assembly or damage.
 We recommend that 2 people carry out the assembly.
 In order to prevent accidents, we recommend that children are kept out of the direct vicinity
during assembly.
We reserve the right to make further technological developments. This means that there many be
minor deviations in the illustrations
 A foundation plan can be obtained from your specialist dealer.
Recommendations
A prerequisite for successful assembly is an absolutely level and square foundation.
In order to avoid rising damp, we recommend that a barrier layer using the packaging film, roofing
paper or similar be laid between the foundation and the floor beams. Roofing paper for a barrier
layer is not included in the scope of this delivery.
The structure should be anchored to the foundation to protect against wind damage. Concrete
anchors or steel angles obtainable from specialist suppliers are suitable for anchoring the floor
beams to the foundation. The anchors are not included in the scope of this delivery.
The roofing felt provided serves primarily as a temporary protection against the weather. We
recommend that you also apply a further layer of roof paper with bitumen cold bonding agent. (Not
included in the delivery!)
The window/door panes must be sealed all round with transparent silicone for windows
immediately after assembly and painting to ensure full resistance to driving rain.
Otherwise extreme rainfall may lead to interior leaks which cause discoloration and damage to the
wood. The manufacturer will accept no liability for such damage, there will be no replacement
within the scope of the guarantee nor is it covered by the manufacturer's warranty. We therefore
refer you again to our guarantee conditions at this point.
Wood protection
The product is made from natural timber, for which regular and adequate wood preservation
measures are obligatory. Please contact a wood preservation expert for information on
professional preservation measures.
Wood preservation is to be carried out by the customer at his own risk. No guarantee can be given
in the event of wood preservation not carried out in accordance with the instructions. Please also
note the provisions relating to this in our guarantee. We wish you much pleasure with your wood
product.

IMPORTANT !

 Protect the wood from hours of direct sunlight and moisture.
 Please do not dispose of the packing list before the guarantee period has expired. This list
enables you to check that all the individual parts are present. It should be retained along with the
proof of purchase.
 The threaded rods of the wind safety device are only tightened by hand. Ensure that the helical
springs remain released while the rods are installed.
Techn. Änderungen vorbehalten!
Alle Maßangaben sind ca. Maße.
3
 Copyright HRB 3662

Publicidad

loading

Este manual también es adecuado para:

116.3025.00.00116.3030.00.00