GEARSTONE CS-WP7 Manual Del Usuario página 13

10 Operating Instructions
Instructions d'utilisation
The remote control and treadmill pairing instructions
1、 Turn on the power and check if the machine work normally.
2、 Hold the remote control and aim it at the display window of the treadmill (as shownin
FIG. 2) within 10 seconds after unplug the treadmill security lock (as shown in FIG. 1).
Meanwhile， press the start/pause button on the remote control for about 3 seconds,
and the system will sounds "didi... ", indicating that the remote control and treadmill
have been successfully paired, and the remote control can be used to control the
treadmill normally.
Security lock
figure 1
Display window
Star/pause
speed
figure 2