Electronic Thermostat - Klarstein PRO 10033348 Manual Del Usuario

ELECTRONIC THERMOSTAT

Up
Down
During normal operation the controller display will show the temperature inside the
refrigerator.
The indicator light indicates that the refrigerator is cooling down and
the compressor is running.
As soon as the set temperature is reached, the compressor switches
off and the control light goes out.
To set the temperature
• Press the SET button. A beep will sound and the display will start flashing.
• Use the UP/DOWN buttons to enter the desired temperature.
• Press the SET button again or wait 5 seconds until the set value has been saved. The
display will show the current indoor temperature again.
To defrost the refrigerator
Note: The refrigerator normally defrosts automatically as soon
as ice accumulates on the evaporator. As long as defrosting is in
progress, the corresponding control lamp lights up.
Um den Kühlschrank manuell zu enteisen, gehen Sie folgendermaßen vor:
• Press and hold the DEFROST button for 6 seconds until a beep sounds.
• In the display, the defrost control lamp lights up and the unit starts defrosting.
• After 20 minutes of defrosting, the unit automatically returns to normal mode and
the indicator light goes out again.
Defrost
Setting
EN
19