The microscope is supplied with a Schuko standard wire and it should be connected to a
current wire provided with an earth wire, it should be handy to be disconnected in case of
emergency.
Never try to repair the microscope by yourself, since you will lose the warranty and may
provoke damages to the general operating system or the electrical installation, as well as
injuries to the people that usually handle the microscope (burns, hurts...) or damages in
nearby equipments.
Please use the plastic cover provided whenever the microscope is not used so as to avoid
dust laying on the optics.
Please keep the original packaging to transport the equipment, either when it is not being
used for a long time or in case you send it for an overhaul.
In the event of breakdown please contact your distributor to overhaul through Zuzi
Technical Assistance Department.
7. THE COMPLETE SET OF THE INSTRUMENT:
Number
1
Stand of up-right metallurgical microscope
2
Infinity compensation free trinocular observing tube
3
Lamp box
Infinity
4
metallurgical
objective
5
Eyepiece
0.01 mm micrometer
6
Halogen bulb 12 V / 30 W
7
User's manual
8
Versión / Version 1; Ene 2017
Name
PL4×
PL10×
PL20×
PL40×
WF10×/20 mm
WF10×/20 mm with reticule 0.1mm
Quantity
1
1
1
1
1
1
1
2
1
1
1
1
24