Premium PES1209 Manual De Uso Y Cuidado página 4

HOW TO ASSEMBLE YOUR ELECTRIC SKILLET
Remove all parts from the packaging.
1. Locate Lid Knob in packaging.
2. Knob should be centered on Glass Lid above screw hole.
3. Place the head screw through screw hole on the inside of the inside of
the lid.
4. Tighten screw until in the lid knob. Do not over tighten. The Lid is
now ready for use.
HOW TO USE YOUR ELECTRIC SKILLET
1. Set the skillet on a flat, dry, heat resistant surface. Caution: some
countertop and table surfaces, such as Corian® and other surfaces are
not designed to withstand the prolonged heat generated by certain
appliances. If you plan to use the product for a prolonged period of
time, we recommend placing a hot pad or trivet under your skillet
beforehand to prevent possible damage to surface.
2. Turn temperature control to "OFF", plug temperature control probe
securely into receptacle on skillet, plug into standard 120V AC outlet
and turn temperature control to desired setting.
3. The temperature control indicator light will come on when you set or
adjust the temperature. Once the desired temperature is reached, the
indicator light will go out. (When adding food, the indicator light will
come on briefly as the overall cooking temperature is reduced.)
4. Preheat the skillet with the lid on for 10-15 minutes or until the
indicator light goes out. NOTE: The cooking temperatures listed in
this user manual are estimates. Adjust the cooking temperature slightly
up or down to achieve the results you prefer.
5. A steam vent is located on the Glass Lid. The steam vent allows steam
to escape while cooking with the lid in place. CAUTION: Escaping
steam is hot! Be careful when removing or lifting lid. Oven mitts are
recommended when removing cover from skillet base or when
replacing it.
NOTE: If heating oil, always leave the lid off. If oil smokes, immediately
turn skillet "OFF" and allow cooling.
2