Noise And Vibration Information; Environmental Instructions - Würth 0891 703 140 Traducción Del Manual De Instrucciones De Servicio Original

Technical data
Item
No-load speed
Compressed air con-
nection
Working pressure
Air consumption

Noise and vibration information

Measured values determined in accordance with
ISO 4871, ISO 15744, ISO3744, ISO 11203
EN ISO 8662-1 : 1988, ISO 5349-1 and
IEC 61260
Wear ear protectors!
Intended use
The appliance is intended for the cleaning of a wide
variety of materials.
The appliance is designed for use with genuine
Würth system accessories.
Any other use is considered an improper use.
Please use only the following Würth cleaning
■
agents in a mixing ratio of 1:20:
• Würth BMF Cleaning Agent
Art. 0893 118 2/3/4
• Würth R1 Universal Cleaning Agent
Art. 0893 125 005 (020/060)
Never clean any safety-relevant parts!
The user is solely responsible for damage
resulting from improper use.
8
0891 703 140
6500 - 7000 min
-1
1/4" coupling
6 - 9 bar
160 l/min
Operation
Remove any loose dirt or soiling from the
■
surface to be cleaned using a brush or vacuum
cleaner.
Important: Hold the cleaning nozzle only
■
approx. 3-5 cm from the surface to be cleaned.
To remove any remaining moisture, wipe the
■
cleaned surface using a dry cloth.
Note
For optimum performance, the appli-
ance needs a constant air pressure of
8 bar.
Maintenance / care [Fig. I]
Oil the gun at the indicated point every day with
■
2-3 drops of a thin-bodied oil (Würth Mainte-
nance Oil Multi Art. 0893 055 40).
Unscrew only at the indicated point when
■
replacing the hose (thin inner hose).
Set the air inlet [1] to ON.
■
Use only BMF Cleaning Agent / R1 Cleaning
■
Agent for cleaning!
Never dismantle the motor block [2] of the
■
appliance.

Environmental instructions

Do not throw the appliance away
with normal household waste.
Dispose of the appliance via an
approved waste disposal company
or via your local authority waste
disposal facility. Observe the
currently valid regulations. In case of
doubt, contact your waste disposal facility. Dispose
of all packaging in an environmentally sound
manner.