Declaration Of Conformity - Würth 0891 703 140 Traducción Del Manual De Instrucciones De Servicio Original

What should I do if the appliance comes to
a standstill?
Is the air inlet set to ON?
■
Has the gun been serviced at regular intervals?
■
If not, please service the appliance according to
the maintenance instructions.
Has only Würth BMF Cleaning Agent or R1
■
Cleaning Agent (ratio of cleaning agent to
water 1:20) been used?
Is the suction hose still OK?
■
Is the inner material hose still OK?
■
Should the appliance then still not function,
■
please send it to our masterService for repair.
Does the appliance have to be serviced?
Yes! For servicing, please follow the mainte-
■
nance instructions also given in these operating
instructions.
How do I replace a hose (inner material
hose)?
Ensure that the appliance is no longer con-
■
nected to the air or electricity supply
Open the end of the motor block as shown in
■
the maintenance instructions
Carefully unscrew the inner material hose
■
Screw on the new inner material hose at the
■
same point
Carefully install the motor block again. Ensure
■
that the thin inner hose passes through the
nozzle
Then securely tighten the motor block again
■
If necessary, cut off any protruding length of
■
hose so that hose and red aluminium sleeve
have the same length
Are spare parts available?
Yes, the following spare parts can be ordered:
■
• Nozzle spare parts set (Art. 0891 703 141):
3x black end nozzle
• Motor spare parts set (Art. 0891 703 142):
1x complete motor unit
• Hose spare parts set (Art. 0891 703 143):
3x inner material hose, 1x suction hose
• Flexible compressed air connection
(Art. 0891 700 232)
FAQ

Declaration of Conformity

We herewith declare that this product conforms to
the following standards and directives:
Standards
• EN ISO 8662-1 : 1988
• ISO 5349-1
• EN 792-12
• IEC 61260
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2006/42/EC
Technical documentation at:
Adolf Würth GmbH & Co. KG, Abt. PFW
General Manager
Adolf Würth
GmbH & Co. KG
Künzelsau: 20.01.2014
General Manager
9