Bosch GOP Professional 30-28 Manual De Instrucciones página 21

Application tool
MAIZ 32 AT/
MAII 32 AIT
StarlockMax
32 × 70 mm bi-
metal plunge cut
saw blade for metal
AYZ 53 BPB
Starlock
53 × 40 mm
plunge cut saw
blade for multi-
material
AII 65 APB
Starlock
65 × 40 mm bi-
metal plunge cut
saw blade for wood
and metal
ACZ 85 EB
Starlock
85 mm diameter
bimetal segment
saw blade for wood
and metal
ACZ 105 ET
Starlock
105 mm diameter
carbide segment
saw blade for
multi-material
ACZ 100 SWB
Starlock
100 mm diameter
bimetal segment
serrated knife for
multi-material
MACZ 145 BB
StarlockMax
145 mm diameter
bimetal segment
saw blade for wood
and metal
ACZ 85 RD4
Starlock
85 mm diameter
Diamond-RIFF seg-
ment saw blade for
mortar and abras-
ive materials
Bosch Power Tools
Material Application
Hard ferrous metals, Extra long and quick saw blade for sawing off highly abras-
highly abrasive materials, ive materials or hard ferrous metals; long service life
fibreglass, gypsum, ce- thanks to BOSCH Carbide Technology;
ment-bound fibreboards, Example: Cutting kitchen front covers, easy cutting
hardened nails and bolts through hardened bolts and stainless steel
Gypsum boards, chip- Optimised for plunge saw cuts with a subsequent longer
boards, sandwich mater- separation cut; the Dual-Tec shape ensures a clean and
ial, wood complete cut both in the corners and during a longer sep-
aration cut;
Example: Plug socket recesses in gypsum boards or
wooden walls
Softwood, hardwood, Splinter-free separation and plunge cuts thanks to round
veneered boards, plastic- sawing edge (Curved-Tec) in coated boards or hardwood;
coated boards, non- Example: Shortening door frames, recesses in laminate
hardened nails and bolts flooring for a tray or built-in furniture, cutting through non-
hardened nails and bolts when flush with the surface
Wooden materials, Separation and plunge saw cuts;
plastic, soft and non-fer- also for sawing close to the edge in difficult-to-access
rous metals areas;
Example: Shortening already installed skirting boards or
door frames, plunge cuts when adapting floor panels
Fibre cement boards, tile Separation and plunge saw cuts; also for sawing close to
joints, brick, fibreglass-re- the edge in difficult-to-access areas; long service life
inforced plastics, lamin- thanks to BOSCH carbide technology;
ate Example: Shortening already installed skirting boards or
door frames, milling cable ducts in brick, quick and low-
dust cutting out of tile joints, cutting fibreglass boards to
size for fittings, adjustment work in laminate; available
from mid-2021
Insulation material, insula- Precise cutting of soft materials;
tion boards, floor panels, example: Cutting insulation boards to size, cutting pro-
impact sound insulation truding insulation material to length so that it is flush with
boards, cardboard, car- the surface
pets, rubber, leather
Wood, hardwood, soft Quick and deep cuts in wooden materials and soft and
and non-ferrous metals, non-ferrous metals, straight-set teeth allow cutting
non-hardened nails and without heat traces; the large surface of the sheet ensures
bolts precise, straight cuts even for a large length;
Example: Sawing shadow joints, sawing off wooden beams
for supports, cutting pipes to size, cutting through non-
hardened nails and bolts when flush with the surface
Cement joints, soft wall Cutting and separating in areas and corners that are close
tiles, fibreglass-reinforced to the edge or difficult to access, extra long service life
plastics, epoxy, GKF thanks to Diamond-RIFF;
Example: Removing joints between wall tiles for repair
work, recesses in tiles;
also available as Carbide-RIFF version: ACZ 85 RT3 for
normal joints, ACZ 70 RT5 for thin joints
English | 21
1 609 92A 5NS | (22.06.2020)