Fcc Requirements And Regulations - Walker W425 El Manual Del Propietario

Federal Communications Commissions Requirements
FCC Part 68 Information
This equipment complies with Part 68 of FCC
Rules and the requirements adopted by the
ACTA. The FCC Part 68 Label is located on the
BASE UNIT of the telephone. This label contains,
among other information, a product identifier in
the format US:AAAEQ##TXXXX. If requested, this
information must be provided to your telephone
company.
Connection to the network should be made using
standard modular telephone jacks, USOC type
RJ11C. The plug and/or jacks used must comply
with FCC Part 68 Rules and requirements
adopted by the ACTA.
The REN is useful in determining the quantity of
devices that you may connect to your telephone
line and still allow these devices to ring when
your telephone number is called. Excessive RENS
on a telephone line may result in the devices not
ringing in response to an incoming call. In most
areas, but not all, the sum of the RENs for all
devices that you may connect to your line should
not exceed five (5.0). To be certain of the
number of devices that you may connect to your
line, you should contact your local telephone
company. The REN for this product is part of the
product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by
## are the REN without a decimal point.
If this telephone equipment, the telephone,
causes harm to the telephone network, the
telephone company will notify you in advance
that temporary discontinuance of service may be
required. But, if advance notice isn't practical,
the telephone company will notify the customer
as soon as possible. Also, you will be advised of
22
your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its
facilities, equipment, operations or procedures
that could affect the proper functioning of your
equipment. If they do, you will be notified in
advance in order for you to make the necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this unit, for repair
or warranty information, please contact customer
service at the phone number listed in the
Warranty section. If the equipment is causing
harm to the network, the telephone company may
request that you disconnect the equipment until
the problem is resolved.
DO NOT DISASSEMBLE THIS EQUIPMENT. It does
not contain any user serviceable components.
Connection to party lines is subject to tariffs.
Contact the state public utility commission, public
service commission or corporation commission for
information.
If your home has specially wired alarm equipment
connected to the telephone line, please ensure
that the installation of this equipment does not
disable alarm equipment by consulting your
telephone company or a qualified installer.
This equipment is hearing aid compatible.
We recommend the installation of an AC surge
arrester in the AC outlet to which this equipment
is connected. The telephone companies report
that electrical surges, typically lightning transients,
are very destructive to customer terminal equipment
connected to AC power sources.