RCA ANT310E QSG 03 Guia De Inicio Rapido

AMPLIFIED
indoor HDTV antenna
QUICK START GUIDE
Use the RCA Signal Finder App
1
to find the best location for your
antenna.
In the Google Play or Apple App Stores,
search for "RCA Signal Finder" and look for
the icon shown here. Then download and
install the App.
Launch the App and follow the directions
there to find the best location and orientation
for your antenna.
Antenna Placement Tips
Avoid metal surfaces (like a metal stand).
Move the antenna close to or in a window.
Position the antenna as high as possible.
2
Connect the antenna to your TV.
Note: If your TV's antenna input
is already connected to a satellite
receiver, cable box, or digital
converter, connect the antenna's
coaxial cable to the antenna input
jack on that device.
3
Plug in the antenna.
Insert the power adapter into the
antenna's DC jack. Plug the other end
into a wall outlet or power strip.
STOP!
DO NOT RETURN this product to the store! Visit
RCAAntennaHelp.com for instructional and how-to videos.
Check out setup videos at
www.RCAAntennaHelp.com
Adjust your antenna for best
4
reception.
> Turn on your TV.
> Adjust the antenna's UHF loop.
> Extend the antenna's dipoles (rods)
and adjust them.
Note: Different channels may require
different antenna adjustments.
5
Scan for channels on your TV.
Most TVs have a channel scan option in their menu
system, many times in a SETUP or CHANNEL menu under
ANTENNA.
For detailed instructions on performing a channel scan,
see the owner's manual that came with your TV.
Important: You must perform a channel scan to receive
any channels!
ANT310E QSG 03
Dipoles
Loop