Descargar Imprimir esta página
RCA ANT1650F Guia Del Usuario
RCA ANT1650F Guia Del Usuario

RCA ANT1650F Guia Del Usuario

Antena multidireccional plana amplificada para interiores

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any Changes or modifi cations not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
Industry Canada Regulatory Information
CAN ICES-3 (B)/NMB-3 (B)
Avis d'Industrie Canada
CAN ICES-3 (B)/NMB-3 (B)
Important: This power unit is intended to be correctly oriented in a vertical or fl oor mount position.
Congratulations on your purchase of the Amplifi ed Flat Multi-Directional Indoor Antenna.
With this contemporary antenna, rabbit ears are a thing of the past. This sleek, attractive
antenna features the most advanced technology, including a patented engineering design
that provides excellent reception for both analog and digital TV broadcasts.
Multi-Directional Antennas
A multi-directional antenna is able to receive signals from any direction. Useful for both
analog and digital reception, the antenna looks great, facilitates optimal reception, and
requires very little space. The patented multi-directional technology ensures that the
antenna does not need to be adjusted according to the location of the transmitting signal.
Antenna Features
The Amplifi ed Flat Multi-Directional Indoor Antenna is packed with features that make
it as functional as it is attractive. Because the antenna is multi-directional, there is no need
to constantly turn the antenna to improve reception. And, with its compact footprint, the
antenna is so unobtrusive, you can hang it on the wall, stand it up or lay it fl at. Its attractive
design complements any décor. The antenna:
ANT1650F / ANT1650R
Amplifi ed Flat Multi-Directional
Indoor Antenna
Antena multidireccional plana amplifi cada para interiores
User's Guide
Guía del Usuario

Publicidad

loading

Resumen de contenidos para RCA ANT1650F

  • Página 1 ANT1650F / ANT1650R Amplifi ed Flat Multi-Directional Indoor Antenna Antena multidireccional plana amplifi cada para interiores User’s Guide Guía del Usuario FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Página 2 • Features a removable amplifi er to optimize reception of local standard defi nition and high defi nition signals • Outperforms traditional antennas due to patented design • Eliminates constant adjustments with multi-directional reception pattern • Gets great reception in any position—lying fl at, hanging, or standing •...
  • Página 3 Connecting the Antenna You can use the antenna with or without its amplifi er, depending on which connection gives you the best signal. Try using the amplifi er fi rst. If you notice that you’ve lost channels that you normally receive, try connecting without the amplifi er. You can connect the antenna directly to your TV or use it with a converter box.
  • Página 4 To connect the antenna with the amplifi er to a converter box: antenna ANT1650 Built-In Coaxial Cable 1. Make sure your converter box is turned off. 2. Connect the antenna’s built-in cable to ANTENNA Amplifier the input jack of the amplifi er. Insert TV/STB Converter Box...
  • Página 5 To connect the antenna without the amplifi er to a converter box: antenna ANT1650 Built-In Coaxial Cable 1. Make sure your TV is turned off. 2. Connect the antenna’s built-in coaxial Converter Box cable to the antenna input on your converter box.
  • Página 6 Coaxial Cable Installation Precautions • Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause shorts and can change a cable’s impedance. • Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds during installation.
  • Página 7 Antena multidireccional plana amplifi cada para interiores Guía del usuario de ANT1650F / ANT1650R Información FCC Este aparato obedece las especifi caciones de la Parte 15 de las regulaciones FCC. Las funciones están sujetas a las siguientes condiciones: 1) Este aparato no puede causar interferencias dañinas, y 2) este aparato puede recibir cualquiera interferencia, incluyendo aquellas que puedan causar funciones no deseadas.
  • Página 8 • Incluye un amplifi cador removible para optimizar la recepción de señales locales de defi nición estándar y de alta defi nición • Supera a las antenas tradicionales gracias a su diseño patentado • Incluye un patrón de recepción multidireccional que elimina los ajustes constantes •...
  • Página 9 Conexión de la antena Puede utilizar la antena con o sin el amplifi cador, dependiendo de la conexión que le brinde la mejor señal. Intente primero con el amplifi cador. Si nota que no puede ver canales que generalmente recibe, intente hacer la conexión sin el amplifi cador. Puede conectar la antena directamente a su TV o utilizarla con un convertidor.
  • Página 10 Para conectar la antena con el amplifi cador a un convertidor: la antena ANT1650 1. Asegúrese que el convertidor esté apagado. Cable coaxial 2. Conecte el cable integrado de la antena al integrado conector de entrada del amplifi cador. 3. Conecte el cable del amplifi cador al ANTENNA Amplificador convertidor acoplando el extremo...
  • Página 11 Para conectar la antena sin el amplifi cador a un convertidor: la antena ANT1650 1. Asegúrese que el TV esté apagado. Cable coaxial integrado 2. Conecte el cable coaxial integrado de la antena a la entrada para antena del Convertidor convertidor.
  • Página 12 Garantía Limitada de 12 Meses VOXX Accessories Corporation (la “Compañía”) le garantiza a usted, el comprador original de este producto que si, bajo condiciones y uso normales, se encontrara que este producto o alguna pieza presenta defectos materiales o de mano de obra dentro de los primeros 12 meses a partir de la fecha de compra original, tales defectos serán reparados o reemplazados (a opción de la Compañía) sin cargo alguno por las piezas y labores de reparación.

Este manual también es adecuado para:

Ant1650r