Meter Connections - Dostmann pH 7+ Manual Del Usuario

Keypad Operations
Momentary press
Long press
Momentary press
Momentary press
Momentary press
Long press
Momentary press

Meter Connections

Models
pH7+ DHS
COND7 +
PC7 + DHS
• In the power-off mode, press this key to turn on the meter
In the calibration mode or the parameter set-up mode, press this key to
•
return to the measurement mode
In the measurement mode, press and hold this key for 2 seconds to turn off the
meter.
pH7+DHS
: press this key to select measurement mode: pH → mV,
•
Cond7+
• : press this key to select measurement mode: COND→TDS
PC7+DHS
• pH/Conductivity meter: press this key to select
measurement mode: pH → mV → COND → TDS
In the measurement mode, press this key to enter in the calibration mode
In the measurement mode, press this key to enter in the parameter
•
set-up main menu
• In the calibration mode, press this key to confirm calibration
In the parameter set-up mode, press this key to select programs
•
In the mode of manual temperature compensation (MTC), when press and hold
these keys, the temperature value flashes, then press this keys to change the
temperature value, and press
In the setup menu and submenu, these keys increases and decreases the value
of the selected parameter (up and down direction)
Photos
•BNC socket— pH electrode or ORP electrode
•RCA socket —temperature probe
•BNC socket— conductivity electrode,
•RCA socket — temperature probe
•BNC socket —pH electrode or ORP electrode,
•BNC socket— conductivity electrode,
•RCA socket— temperature probe
7
Descriptions
to confirm
Description
EN