Steren CCTV-130 Manual De Instrucciones página 3

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAMERA OPERATING INSTRUCTIONS
1.- Place the camera where you need to monitor.
2.- Plug the AC power adaptor to an AC household outlet.
3.- Insert the cable from the AC adaptor into the camera's black
plug.
4.- Connect the yellow and white RCA plugs to the audio / video
inputs on your TV or other audio / video device using audio /
video cables with RCA plugs (red = audio = white, yellow =
video).
5.- Select the correct video input on your audio / video device.
(See your audio / video device's instruction manual)
6.- If you should have an image twist the lens until you fi nd the
correct focus point.
7.- Now the camera is ready to use it.
Set the focus
We recommend not to use a bigger RCA cable than 30cm.
We recommend not to use a bigger RCA cable than 30cm.
Do not place the camera too close to your TV or other audio
Do not place the camera too close to your TV or other audio
/ video device as this could cause an echo or a faint buzz.
/ video device as this could cause an echo or a faint buzz.
If this should happen, place the camera and the TV further
If this should happen, place the camera and the TV further
apart or lower the volume on your TV.
apart or lower the volume on your TV.
To AC Power Adaptor
Video
Audio
Set the angle
ENGLISH-3

Publicidad

Tabla de contenido
loading

Tabla de contenido