Pre-Installation (continued)
PACKAGE CONTENTS
A
2*
Part
Description
A
Doorbell
B
Push button
*Tune/Sync/Reset button. See Selecting a tune or Troubleshooting for additional information.
Installation
1
Installing the batteries
Push the battery cover tab toward the battery
cover (1) and pull to remove.
Install 3 alkaline "C" batteries (not included)
into the doorbell (A). Make sure batteries are
installed according to the diagram inside the
chime.
Replace the battery cover (1) onto the
doorbell (A).
2
Removing the battery tab
Remove the back of the push button (B) by
pushing in the tab on the bottom with a small
screwdriver (not included).
Remove the orange battery tab from the push
button (B).
Quantity
Model HB-7773-03
1
1
NOTE: In typical use, alkaline batteries will last up to
one year.
1
4
B
Quantity
Model HB-7734-03
1
2
A
B