Easy Installation Guides - GE 29884-PK1 Manual De Usuario

EASY INSTALLATION FOR ANALOG TVS WITH SET-TOP BOX
1) Connect the coax cable from the antenna to your set-top
box antenna input. Then connect another coax cable (not
included) to the antenna output on the set-top box.
2) Connect the other end of that cable to the antenna input
on your TV.
3) Following your set-top box instruction manual to scan for
channels on your set-top box.
EASY INSTALLATION FOR TODAY'S HDTVS
1) Connect the coax cable from the antenna to the antenna
input on your TV.
2) Follow your TV's instruction manual to scan for channels
on your television.
DANGER LABEL APPLICATION
If your antenna mounting structure, such as a mast, J-Mount
or pole, does not have a danger label, apply the danger label
provided to the base of the mounting structure in a clearly
visible location.
ANTENNA REMOVAL
Inspect the area carefully for power lines. Pay attention for
any new power lines that may have been installed. Make sure
there is no possibility the antenna, its mounting structure or
your ladder can come in contact with power lines. Be sure to
consider what can go wrong during antenna removal. Repeat
the steps for antenna installation but in reverse order.
17