General Description; Specifications - Rotary RJ7100Y Manual De Instrucciones

General Description

The rolling jack assembly shall be an air operated, scissors style rolling jack assembly capable of lifting the
wheels free of the runways for brake, suspension and tire service.
Description of installed equipment:
A. Depending on model, the lifting capacity of the rolling jack shall be 7000 lbs. (3175 kg), 6000 lbs. (2721 kg)
(when supplied with 100 psi (6.9 bar) minimum, 120 psi (8.3 bar) maximum regulated air at 20 CFM (0.57 m3/
min.)
B. RJ7100Y: The rail engaging wheels shall be adjustable for an inside runway width of 36 3/4" (934 mm) mini-
mum to a 46 1/16" (1170 mm) maximum Fig. 2.
C. RJ7100Y-X: The rail engaging wheels shall be adjustable for an inside runway width of 39 3/4" (1011 mm) mini-
mum to a 46 3/8" (1179 mm) maximum Fig. 3.
D. RJ6100Y: The rail engaging wheels shall be adjustable for an inside runway width of 36 3/4" (934 mm) mini-
mum to a 46 1/16" (1170 mm) maximum Fig. 4.
E. RJ6100Y-1: The rail engaging wheels shall be adjustable for an inside runway width of 36 1/2" (926 mm) mini-
mum to a 49 3/4" (1264 mm) maximum Fig. 5.
F. The rolling jack shall be equipped with two (2) different sized rubber pads 1 1/2" and 3".
G. The rolling jack shall be equipped with two (2) truck adapters, two (2) 3" adapter extensions, and two (2) 5"
adapter extensions.
H. The rolling jack shall be equipped with a locking latch assembly that will lock at full-rise and that is released
by actuating the lock handle.
I. The scissor mechanism shall be covered by an accordion style rubber shield.
J. The rolling jack shall be moveable on four (4) heavy duty urethane compression wheels. Actual vehicle load
to be transferred to jack end section load bars engaging the roller track assembly.
*Specifications are subject to change without notice.
Fig. 2
Telescoping Ends
Telescoping Ends
Minimum 36 3/4" (934mm)
Minimum 36 3/4" (934mm)
Extends To
Extends To
Maximum 46 1/16" (1170mm)
Maximum 46 1/16" (1170mm)
RJ7100Y
4
Height
Height
Minimum Collapse 7 7/8" (200mm)
Minimum Collapse 7 7/8" (200mm)
Maximum 18 3/4" (476mm)
Maximum 18 3/4" (476mm)